home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Internet Info 1994 March
/
Internet Info CD-ROM (Walnut Creek) (March 1994).iso
/
inet
/
internet-drafts
/
draft-ietf-dns-common-errors-01.txt
< prev
next >
Wrap
Text File
|
1993-08-11
|
22KB
|
574 lines
INTERNET DRAFT Anant Kumar
Expiration Date: February 13, 1994 Jon Postel
Cliff Neuman
USC/ISI
Peter Danzig
Steve Miller
USC
July 1993
Common DNS errors and suggested fixes.
Status of this Memo
This document is an Internet-Draft. Internet-Drafts are working
documents of the Internet Engineering Task Force (IETF), its Areas, and
its Working Groups. Note that other groups may also distribute working
documents as Internet-Drafts. Internet-Drafts are draft documents valid
for a maximum of six months. Internet-Drafts may be updated, replaced,
or obsoleted by other documents at any time. It is not appropriate to
use Internet-Drafts as reference material or to cite them other than as
a ``working draft'' or ``work in progress.''
To learn the current status of any Internet-Draft, please check the
1id-abstracts.txt listing contained in the Internet-Drafts Shadow
Directories on ds.internic.net, nic.nordu.net, ftp.nisc.sri.com, or
munnari.oz.au.
This Internet Draft expires February 13, 1994.
Abstract
This memo describes common errors seen in DNS implementations and
suggests some fixes. Where applicable, violations of recommendations
from RFC 1034 and RFC 1035 are mentioned. The memo also describes,
where relevant, the algorithms followed in BIND (versions 4.8.3 and 4.9
which the authors referred to) to serve as an example.
Introduction
The last few years have seen, virtually, an explosion of DNS traffic on
the NSFnet backbone. Various DNS implementations and various versions
of these implementations interact with each other, producing huge
amounts of unnecessary traffic. Attempts are being made by researchers
all over the internet, to document the nature of these interactions,
the symptomatic traffic patterns and to devise remedies for the sick
pieces of software.
This draft is an attempt to document fixes for known DNS problems so
people know what problems to watch out for and how to repair broken
software.
[Page 1]
USC/ISI Kumar, Postel, Neuman
Danzig, Miller
1. Fast Retransmissions.
DNS implements the classic request-response scheme of client-server
interaction. UDP is, therefore, the chosen protocol for communication
though TCP is used for zone transfers. The onus of requerying in case
no response is seen in a "reasonable" period of time, lies with the
client. Although RFC 1034 and 1035 do not recommend any retransmission
policy, RFC1035 does recommend that the resolvers should cycle through
a list of servers. Both name servers and stub resolvers should,
therefore, implement some kind of a retransmission policy based on
round trip time estimates of the name servers. The client should
back-off exponentially, probably to a maximum timeout value.
However, clients might not implement either of the two. They might not
wait a sufficient amount of time before retransmitting or they might
not back-off their inter-query times sufficiently.
Thus, what the server would see will be a series of queries from the
same querying entity, spaced very close together. Of course, a
correctly implemented server discards all duplicate queries but the
queries contribute to wide-area traffic, nevertheless.
We classify a retransmission of a query as a pure Fast retry timeout
problem when a series of query packets meet the following conditions.
a. Query packets are seen within a time less than a "reasonable
waiting period" of each other.
b. No response to the original query was seen i.e. we see two or
more queries, back to back.
c. The query packets share the same query identifier.
d. The server eventually reponds to the query.
A GOOD IMPLEMENTATION:
BIND (we looked at versions 4.8.3 and 4.9) implements a good
retransmission algorithm which solves or limits all of these problems.
The Berkeley resolver queries servers at an interval that starts at the
greater of 4 seconds and 5 seconds divided by the number of servers the
resolver queries. The resolver cycles through servers and at the end of
a cycle, backs off the time out exponentially.
The Berkeley name-server starts with a time-out equal to the greater of
4 seconds and two times the round-trip time estimate of the server.
The time-out is backed off with each cycle, exponentially, to a ceiling
value of 45 seconds.
FIXES:
a. Estimate round-trip times or set a reasonably high initial
time-out.
b. Back-off timeout periods exponentially.
[Page 2]
USC/ISI Kumar, Postel, Neuman
Danzig, Miller
c. Yet another fundamental though difficult fix is to send the client
an acknowledgement of a query, with a round-trip time estimate.
Since UDP is used, no response is expected by the client until the
query is complete. Thus, it is less likely to have information about
previous packets on which to estimate its back-off time. Unless, you
maintain state across queries, so subsequent queries to the same server
use information from previous queries. Unfortunately, such estimates
are likely to be inaccurate for chained requests since the variance is
likely to be high.
The fix chosen in the ARDP library used by Prospero is that the server
will send an initial acknowledgement to the client in those cases where
the server expects the query to take a long time (as might be the case
for chained queries). This initial acknowledgement can include an
expected time to wait before retrying.
This fix is more difficult since it requires that the client software
also be trained to expect the acknowledgement packet. This, in an
internet of millions of hosts is at best a hard problem.
2. Recursion Bugs
When a server receives a client request, it first looks up its zone
data and the cache to check if the query can be answered. If the answer
is unavailable in either place, the server seeks names of servers that
are more likely to have the information, in its cache or zone data. It
then does one of two things. If the client desires the server to
recurse and the server architecture allows recursion, the server chains
this request to these known servers closest to the queried name. If the
client doesn't seek recursion or if the server cannot handle recursion,
it returns the list of name servers to the client assuming the client
knows what to do with these records.
The client queries this new list of name servers to get either the
answer, or names of another set of name servers to query. This process
repeats until the client is satisfied. Servers might also go through
this chaining process if the server returns a CNAME record for the
queried name. Some servers reprocess this name to try and get the
desired record type.
However, in certain cases, this chain of events may not be good. For
example, a broken or malicious name server might list itself as one of
the name servers to query again. The unsuspecting client resends the
same query to the same server.
In another situation, more difficult to detect, a set of servers might
form a loop wherein A refers to B and B refers to A. This loop might
involve more than two servers.
Yet another error is where the client does not know how to process the
list of name servers returned, and requeries the same server since that
[Page 3]
USC/ISI Kumar, Postel, Neuman
Danzig, Miller
is one (of the few) servers it knows.
We, therefore, classify recursion bugs into three distinct categories:
a. Ignored referral: Client did not know how to handle NS records in
the AUTHORITY section.
b. Too many referrals: Client called on a server too many times,
beyond a "reasonable" number, with same query. This is different
from a Fast retransmission problem and a Server Failure
detection problem in that a response is seen for every query.
Also, the identifiers are always different. It implies client is
in a loop and should have detected that and broken it. (RFC 1035
mentions that client should not recurse beyond a certain depth)
c. Malicious Server: a server refers to itself in the authority
section. If a server does not have an answer now, it is very
unlikely it will be any better the next time you query it,
specially when it claims to be authoritative over a domain.
RFC 1034 warns against such situations, on page 35.
"Bound the amount of work (packets sent, parallel processes
started) so that a request can't get into an infinite loop or
start off a chain reaction of requests or queries with other
implementations EVEN IF SOMEONE HAS INCORRECTLY CONFIGURED
SOME DATA."
A GOOD IMPLEMENTATION:
BIND fixes at least one of these problems. It places an upper limit on
the number of recursive queries it will make, to answer a question. It
chases a maximum of 20 referral links and 8 canonical name
translations.
FIXES:
a. Set an upper limit on the number of referral links and CNAME links
you are willing to chase.
Note that this is not guaranteed to break only recursion loops. It
could, in a rare case, prune off a very long search path,
prematurely. We know, however, with high probability, that if
the number of links cross a certain metric (two times the depth
of the DNS tree), it is a recursion problem.
b. Watch out for self-referring servers. Avoid them whenever
possible.
c. Make sure you never pass off an authority NS record with your own
name on it!
[Page 4]
USC/ISI Kumar, Postel, Neuman
Danzig, Miller
d. Fix clients to accept iterative answers from servers not built to
provide recursion. Such clients should either be happy with the
non-authoritative answer or be willing to chase the referral links
themselves.
3. Zero Answer Bugs:
Name servers sometimes return an authoritative NOERROR with no ANSWER,
AUTHORITY or ADDITIONAL records. This happens when the queried name is
valid but it does not have a record of the desired type. Of course, the
server has authority over the domain.
However, once again, some implementations of resolvers do not interpret
this kind of a response reasonably. They always expect an answer record
when they see an authoritative NOERROR. These entities continue to
resend their queries, possibly endlessly.
A GOOD IMPLEMENTATION.
BIND resolver code does not query a server more than 3 times. If it is
unable to get an answer from 4 servers, querying them three times each,
it returns error.
Of course, it treats a zero-answer response the way it should be
treated; with respect!
FIXES:
a. Set an upper limit on the number of retransmissions for a given
query, at the very least.
b. Fix resolvers to interpret such a response as an authoritative
statement of non-existence of the record type for the given name.
4. Inability to detect server failure:
Servers in the internet are not very reliable (they go down every once
in a while) and resolvers are expected to adapt to the changed scenario
by not querying the server for a while. Thus, when a server does not
respond to a query, resolvers should try another server. Also,
non-stub resolvers should update their round trip time estimate for the
server to a large value so that server is not tried again before other,
faster servers.
Stub resolvers, however, cycle through a fixed set of servers and if,
unfortunately, a server is down while others do not respond for other
reasons (high load, recursive resolution of query is taking more time
than the resolver's time-out, ....), the resolver queries the dead
server again! In fact, some resolvers might not set an upper limit on
the number of query retransmissions they will send and continue to
query dead servers indefinitely.
[Page 5]
USC/ISI Kumar, Postel, Neuman
Danzig, Miller
Name servers running system or chained queries might also suffer from
the same problem. They store names of servers they should query for a
given domain. They cycle through these names and in case none of them
answers, hit each one more than one. It is, once again, important that
there be an upper limit on the number of retransmissions, to prevent
network overload.
This behavior is clearly in violation of the dictum in RFC1035 (p 46)
"If a resolver gets a server error or other bizarre response
from a name server, it should remove it from SLIST, and may
wish to schedule an immediate transmission to the next
candidate server address."
Removal from SLIST implies that the server is not queried again for
some time.
Correctly implemented name servers should, as pointed out before,
update round trip time values for servers that do not respond and query
them only after other, good servers. Servers might, however, not follow
any of these common sense directives. They query dead servers, and they
query them endlessly.
A GOOD IMPLEMENTATION:
BIND places an upper limit on the number of times it queries a server.
Both the resolver and the name server code do this. Also, since the
server estimates round-trip times and sorts name server addresses by
these estimates, it does not query a dead server again, until and
unless all the other servers in the list are dead too! Further, BIND
implements exponential back-off too.
FIXES:
a. Set an upper limit on number of retransmissions.
b. Measure round-trip time from servers (some estimate is better than
none). Treat no response as a "very large" round-trip time.
c. Maintain a weighted rtt estimate and decay the "large" value
slowly, with time, so that the server is eventually tested again,
but not after an indefinitely long period.
d. Follow an exponential back-off scheme so that even if you do not
restrict the number of queries, you do not overload the net
excessively.
5. Cache Leaks:
Every resource record returned by a server is cached for TTL seconds,
where the TTL value is returned with the RR. Servers (not
stub-resolvers) cache the RR and answer any queries based on this
[Page 6]
USC/ISI Kumar, Postel, Neuman
Danzig, Miller
cached information, in the future, until the TTL expires. After that,
one more query to the wide-area network gets the RR in cache again.
Servers might not implement this caching mechanism well. They might
impose a limit on the cache size or might not interpret the TTL value
correctly. In either case, queries repeated within a TTL period of a RR
constitute a cache leak.
A GOOD/BAD IMPLEMENTATION:
BIND has no restriction on the cache size and the size is governed by
the limits on the virtual address space of the machine it is running
on. BIND caches RRs for the duration of the TTL returned with each
record.
It does, however, not follow the RFCs with respect to interpretation of
a 0 TTL value. If a record has a TTL value of 0 seconds, BIND uses the
minimum TTL value, for that zone, from the SOA record and caches it for
that duration. This, though it saves some traffic on the wide-area
network, is not correct behavior.
FIXES:
a. Look over your caching mechanism to ensure TTLs are interpreted
correctly.
b. Do not restrict cache sizes (come on, memory is cheap!). Expired
entries are reclaimed periodically, anyway. Of course, the cache
size is bound to have some physical limit. But, when possible,
this limit should be large (run your name server on a machine
with a large amount of physical memory).
c. Possibly, a mechanism is needed to flush the cache, when it is
known or even suspected that the information has changed.
6. Name Error Bugs:
This bug is very similar to the Zero Answer bug. A server returns an
authoritative NXDOMAIN when the queried name is known to be bad, by the
server authoritative for the domain, in the absence of negative
caching. This authoritative NXDOMAIN response is usually accompanied
by the SOA record for the domain, in the authority section.
Resolvers should recognize that the name they queried for was a bad
name and should stop querying further.
Some resolvers might, however, not interpret this correctly and
continue to query servers, expecting an answer record.
Some applications, in fact, prompt NXDOMAIN answers! When given a
perfectly good name to resolve, they append the local domain to it e.g.
[Page 7]
USC/ISI Kumar, Postel, Neuman
Danzig, Miller
a resolver in the domain "foo.bar.com", when trying to resolve the name
"usc.edu" first tries "usc.edu.foo.bar.com", then "usc.edu.bar.com" and
finally the good name "usc.edu". This causes at least two queries that
return NXDOMAIN, for every good query. The problem is aggravated since
the negative answers from the previous queries are not cached. When the
same name is sought again, the process repeats.
Some DNS resolver implementations suffer from this problem, too. They
append the local domain to a name, when certain conditions are satisfied
and try the original name, only when this first iteration fails.
GOOD/BAD IMPLEMENTATIONS:
Some local versions of BIND already implement negative caching. They
typically cache negative answers with a very small TTL, sufficient to
answer a burst of queries spaced close together, as is typically seen.
The next official public release of BIND (4.9.2) will have negative
caching as an ifdef'd feature.
The BIND resolver appends local domain to the given name, when one of
two conditions is met:
i. The name has no periods and the flag RES_DEFNAME is set.
ii. There is no trailing period and the flag RES_DNSRCH is set.
The flags RES_DEFNAME and RES_DNSRCH are default resolver options, in
BIND, but can be changed at compile time.
Only if the name, so generated, returns an NXDOMAIN is the original name
tried as a Fully Qualified Domain Name. And only if it contains at least
one period.
FIXES:
a. Fix the resolver code.
b. Negative Caching. Negative caching servers will restrict the
traffic seen on the wide-area network, even if not curb it
altogether.
c. Applications and resolvers should not append the local domain to
names they seek to resolve, as far as possible. Names interspersed
with periods should be treated as Fully Qualified Domain Names.
Only Single label names and names with periods that return NXDOMAIN
answers should be appended with the local domain and tried.
Associated with the name error bug is another problem where a server
might return an authoritative NXDOMAIN, although the name is valid. A
secondary server, on start-up, reads the zone information from the
primary, through a zone transfer. While it is in the process of loading
the zones, it does not have information about them, although it is
[Page 8]
USC/ISI Kumar, Postel, Neuman
Danzig, Miller
authoritative for them. Thus, any query for a name in that domain is
answered with an NXDOMAIN response code. This problem might not be
disastrous were it not for negative caching servers that cache this
answer and so propagate incorrect information over the internet.
BAD IMPLEMENTATION:
BIND apparently suffers from this problem.
Also, a new name added to the primary database will take a while to
propagate to the secondaries. Until that time, they will return NXDOMAIN
answers for a good name. Negative caching servers store this answer, too
and aggravate this problem further. This is probably a more general DNS
problem but is apparently more harmful in this situation.
FIX:
a. Servers should start answering only after loading all the zone
data. A failed server is better than a server handing out
incorrect information.
b. Negative cache records for a very small time, sufficient only to
ward off a burst of requests for the same bad name. This could be
related to the round-trip time of the server from which the negative
answer was received. Alternatively, a statistical measure of the
amount of time for which queries for such names are received could
be used. Minimum TTL value from the SOA record is not advisable
since they tend to be pretty large.
c. A "PUSH" (or, at least, a "NOTIFY") mechanism should be allowed and
implemented, to allow the primary server to inform secondaries that
the database has been modified since it last transferred zone data.
To alleviate the problem of "too many zone transfers" that this
might cause, Incremental Zone Transfers should also be part of DNS.
Also, the primary should not NOTIFY/PUSH with every update but bunch
a good number together.
7. Format Errors:
Some resolvers issue query packets that do not necessarily conform to
standards as laid out in the relevant rfcs. This unnecessarily
increases net traffic and wastes server time.
FIXES:
a. Fix resolvers.
b. Each resolver verify format of packets before sending them out,
using a mechanism outside of the resolver. This is, obviously,
needed only if step 1 cannot be followed.
[Page 9]
USC/ISI Kumar, Postel, Neuman
Danzig, Miller
Authors' Addresses:
Anant Kumar, Jon Postel, Cliff Neuman Peter Danzig, Steve Miller
<anant, postel, bcn> <danzig, smiller>
@isi.edu @caldera.usc.edu
USC Information Sciences Institute Computer Science Department
4676 Admiralty Way Univ. of Southern California
Marina Del Rey CA 90292-6695 University Park
Los Angeles CA 90089
Phone:(310) 822-1511
FAX: (310) 823-6714
This Internet Draft expires February 13, 1994.
[Page 10]